Bartec MC 9090ex-S Manuel d'utilisateur télécharger pdf (Page 43)

Additional Components

6.1.4 Inserting/Replacing the SD Card

The hardware status of the SD cards is specified in the test certificate. Accordingly only the

SD cards with the order number 17-28BE-F006/000x are to be used.

1. Take off the keypad as instructed in chapter 6.1.3; repeat steps 1 - 4.

Figure 7: MC 9090

without keypad

2. Lift up the card holder, insert the SD card under the clamp in the designated direction

and position correctly. (The side with the gold contacts faces downwards)

Figure 8: Replacing the SD card

3. Check that the keypad is mounted correctly.

Figure 9: SD slot with 512 MB card

4. Mount the keypad onto the MC 9090

as shown in chapter 6.1.3; steps 5 - 10.

SD card slot

D-K

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 71 72

Pas de commentaire

Bartec MC 9090ex-S Manuel d'utilisateur Page 43